3 CO100-EU-EN v2.1 7/13
9. ESC button
Press this button to exit the current mode.
10. AC adaptor socket
11. Power ON LED
Backlight
Touch the button area below the LCD and the backlight will turn on. It will turn off automatically
after 20 seconds of inactivity. Press “ESC” button at any time to exit the function.
Maintenance
1. The meter should be cleaned with a damp cloth and mild detergent when necessary. Do not use
solvents or abrasives.
2. Store the meter in an area with moderate temperature and humidity.
Specifications
Function Range Resolution Accuracy
CO2 0 to 9999ppm 1ppm ±75 ppm or ±5% of reading
Temperature
23 to 122°F
(-5°C to 50°C)
0.1° ±1.5°C/2.7°F
Humidity 0.1 to 90.0% 0.1% ±5%
Display LCD with backlighting
Sampling Interval: 2 seconds
Overload Indication: “-OL-”
Sensor Type CO
2: NDIR (non-dispersive infrared) technology
Operating Conditions -5°C to 50 °C (23 oF to 122 oF) at < 90 % RH
Storage Conditions -5°C to 50 °C (23 oF to 122 oF) at < 90 % RH
Power Supply 110V～220V AC, output 6.0V DC ≥ 500mA (supplied)
Dimensions / Weight 117x102x102mm (4.6x4x4”); 204g (7.2 oz.)
Copyright © 2013 FLIR Systems, Inc.
All rights reserved including the right of reproduction in whole or in part in any form.
www.extech.com
To Previous Page
Need help?
General