ENGLISH
GB-23
WARNING
A hose that attaches to a sink spray can
burst if it is installed on the same water line
as the dishwasher. If your sink has one, it is
recommended that the hose be disconnected
and the hole plugged.
How to connect the safety supply hose
1. Pull e safety supply hoses completely out
from storage compartment located at rear of
dishwasher.
2. Tighter the screws of the safety supply hose
to the faucet with thread 3/4inch.
3. Turn water fully on before starting the
dishwasher.
How to disconnect the safety supply hose
1. Turn o the water.
2. Unscrew the safety supply hose from the
faucet.
Connection Of Drain Hoses
Insert the drain hose into a drainpipe with a
minimum diameter of 4 cm, or let it run into the
sink, making sure to avoid bending or crimping
it. e height of drainpipe must be less than
To Next Page
Loading...
Need help?
General
