ENGLISH
GB-27
Underneath existing work top
(When tting beneath a
work top) In most modern
tted kitchens there is only
one single work top under
which cabinets and electrical
appliances are tted. In this
case remove the work top of
the dishwasher by unscrewing the screws under
the rear edge of the top (a).
Attention
After removing the work top, the screws must be
screwed again under the rear edge of the top (b).
e height will then be reduced to815 mm,
as scheduled by the International Regulations
(ISO) and the dishwasher will t perfectly under
the kitchen working top
Built-In Installation (for the integrated model)
Step 1. Selecting the best location for the
dishwasher
e installation position of dishwasher should be
near the existing inlet and drain hoses and power
cord.
To Next Page
Loading...
Need help?
General
