1.6.4.2 Examine the condition of the belts ..................................1-30
1.6.5 Maintenance to be made at 400 - 800 hours intervals ..........................1-30
1.6.5.1 Change engine oil ..............................................1-30
1.6.5.2 Change oil filter ...............................................1-31
1.6.5.3 Update the engine software ......................................1-31
1.6.5.4 How to recognize an engine with hydraulic lash adjusters .................1-32
1.6.6 Change fuel filters ....................................................1-32
1.6.7 Bleed the fuel system .................................................1-34
1.6.8 Maintenance to be made at 4000 hours intervals ............................. 1-35
1.6.8.1 Check turbocharger play and check that the intercooler cell is clean ......... 1-35
1.6.9 Maintenance to be made once a year or 1200 hours ...........................1-35
1.6.9.1 SCR system maintenance ........................................1-35
1.6.9.2 Replace the main filter and the inlet filter of the supply module .............1-36
1.6.10 Maintenance to be made every two years ..................................1-37
1.6.10.1 Change coolant .............................................. 1-37
1.6.11 Additional maintenance instructions ......................................1-38
1.6.11.1 Before the cold season .........................................1-38
1.6.11.2 Tightening torques ............................................1-38
1.6.11.3 Coolant quality requirements .....................................1-40
1.6.11.4 Fuel quality requirements .......................................1-41
1.7 Technical data .........................................................1-45
1.7.1 Torque specifications ..................................................1-45
1.7.1.1 Torque specifications ...........................................1-45
1.7.1.2 Constant torque hose clamps .....................................1-45
1.7.1.3 Metric fasteners ...............................................1-45
1.7.1.4 Inch fasteners ................................................1-46
1.7.2 Machine specifications ................................................1-50
1.7.2.1 General dimensions ............................................1-50
1.7.2.2 Rear view dimensions .......................................... 1-51
1.7.2.3 Shipping weights ..............................................1-51
1.7.2.4 Machine specifications ..........................................1-53
1.7.2.5 Noise vibration level ............................................1-54
1.7.3 Engine specifications ..................................................1-55
Table of contents
1-2 Rubber Track Tractor
79037272A
Find manuals at https://best-manuals.com
To Next Page
Loading...
Need help?
General
