USER’S QUICK GUIDE: DUOX ILOFT TELEPHONE
Cod. 970144I V12_18
USER’S QUICK GUIDE: DUOX iLOFT TELEPHONE
CONTROL BUTTONS / LEDS
Ring tone volume setting.
· On standby: At the MINIMUM, call disconnection (Do Not Disturb Mode).
· Conversation in progress: Upstream audio setting.
Lock release button / Call to the concierge:
· While in conversation: Pushing this button will activate the lock release.
· On receiving the call (non-active audio): There are 30 seconds in which
to complete the release process.
· In standby mode: Pressing this button will make a call to the concierge
(if exits).
Auxiliary function (check with your installer).
LEDs
Micro
Audio Activation, Hang-Up and Auto Switch-On Buttons:
· Audio activation: When you receive a call press this button to speak with the visitor. The audio
channel is opened and operation is in hands-free mode (by default).
· Hung up: Press to end the conversation, or the conversation will end after 90 seconds.
· Auto switch-on (only with video panel): In standby mode, press and release this button, (the
blue LED will light up). This feature is possible with the outdoor panel “0” of the same block, if
there is not other conversation in progress.
Notas:
- When receiving a call, there is a 30-second interval in which to answer. The red LED light shuts
down during this time, indicating a pending call.
- If a call is received from another panel, when the conversation has been completed, for 15 seconds,
auto switch-on will happen with that panel.
Not
programmed
Standby Call
Called
Handsfree
audio
Operation
LEDs
Output Audio
simplex mode
Input Audio
simplex mode
Do not
Disturb Mode
Red
Blue
Green Led: Depending on confi guration, (check with your installer).
USER SETTINGS:
Simplex (Push to Talk) conversation mode
Ringtone Selection (MELODIES)
LEDs
Switched on
Slow blinking
Fast blinking
To Next Page
Need help?
General