EasyManuals Logo
Home>Fermax>Intercom System>MDS Series

Fermax MDS Series User Manual

Fermax MDS Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Cod.94556 V04/04
LECTORES MDS DIGITAL CONTROLLER / MDS DIGITAL CONTROLLER READERS
Teclado MDS digital con display Ref. 23411 / MDS digital keypad with display Ref. 23411
Teclado MDS digital Ref. 23291 / MDS digital keypad Ref. 23291
El equipo se bloquea.
Comprobar que el varistor está colocado en el abrepuertas.
The system is blocked. Verify the varistor is connected in the electric lock.
SINTOMA / SYMPTOM
PUNTOS A VERIFICAR / POSSIBLE CAUSES
Al terminar de introducir un código, no se abre la puerta.
After entering a user code the door does not open.
Código no programado o no autorizado.
Comprobar conexión del cable par trenzado apantallado.
The user code is not activated or permitted in the system.
Make sure that the shielded twisted pair is well connected.
Al terminar de introducir un código, el lector emite un «beep largo» y no se abre
la puerta.
Verificar abrepuertas.
Comprobar alimentación 12 Vdc.
After entering a user code a «large beep» is heard and the door does not
open.
Verify the electric lock.
Make sure that the supply to the reader is 12 Vdc.
Al pulsar alguna tecla, no emite ningún «beep» y no se abre la puerta.
Tecla del lector defectuosa.
Si ocurre con todas las teclas, comprobar alimentación 12 Vdc.
Pressing a Key, a «beep» is not heard and the door does not open.
Key reader faulty.
If it occurs in all of the Keys, make sure that the supply to the reader is
12 Vdc.
* It’s possible to connect up to 32 readers.
* Electric locks can be connected directly to the reader (12 Vdc 500 mA.) and Security Systems require Relay Decoders.
* Ask for the MDS-DC Programming Manual for further details.
TABLA DE INCIDENCIAS Y SOLUCIONES / TROUBLESHOOTING
Ab
CN5
6
+
Tc
+
-
3
2
1
Cp
-+
Sa
CN8 SW1
Dt
CN3
Sb
26 SB
-+
CN2
-
Ck
ABCD
ON
87654321
12 Vdc - 500 mA. max.
DOOR OPEN
SENSOR
PULSADOR APERTURA
EXIT BUTTON
DETECTOR
PUERTA ABIERTA
ELECTRIC LOCK
ABREPUERTAS
VARISTOR
VARISTOR
-
+
SbSa
LECTOR MDS DIGITAL
MDS DIGITAL READER
Configuración microswitches
Microswitches configuration
Microswitches de codificación del número de acceso en la parte trasera.
Asegurese que no hay números de acceso repetidos.
Microswitches del 1al 5, deben ser configurados dependiendo del número de acceso
configurado en el lector.
Microswitch 6, no tiene función en este tipo de lectores.
Microswitches 7 y 8, codificación del tiempo de apertura del abrepuertas si se conecta
directamente en el lector. Ver dibujo en esta página.
CODIFICACION/SETTING
Tiempo apertura Abrepuertas
Electric lock operating time
1 Segundo
1 Second
4 Segundos
4 Seconds
7 Segundos
7 Seconds
10 Segundos
10 Seconds
ON
512 3 4 768
ON
512 3 4 768
ON
512 3 4 768
ON
512 3 4 768
ON
ON
ON
ON ON
512 3 4 768
512 3 4 768 512 3 4 768
ON ON
512 3 4 768
ON ON
512 3 4 768 512 3 4 768
ON ON ON
ON
ON
ON
ON
ON
ON
ON
ON ON
ON ON ON
ON
ON ON
ON
012 3
ON
512 3 4 768
20
21
22 23
16 17 18 19
ON
ON
ON ON
512 3 4 768
512 3 4 768
512 3 4 768 512 3 4 768
30 31
5
67
10
11
15
25 26 27
12 13 14
8
28
29
4
9
24
512 3 4 768 51234 768
512 3 4 768 512 3 4 768 512 3 4 768
512 3 4 768
512 3 4 768
512 3 4 768 512 3 4 768
512 3 4 768
512 3 4 768
512 3 4 768
512 3 4 768
512 3 4 768 512 3 4 768 512 3 4 768
512 3 4 768
512 3 4 768
512 3 4 768
512 3 4 768
512 3 4 768
DESCRIPCION DE COMPONENTES DE LOS LECTORES MDS DIGITAL/MDS DIGITAL READERS COMPOSITION
ON
1
2
3
4
5
6
7
8
DETALLE.
DETAIL.
CODIFICACION DE MICROSWITCHES EN LA PLACA/SWITCHES CODIFICATION IN PANEL.
CARACTERISTICAS TECNICAS/TECHNICAL FEATURES
+, -: Alimentación (12 Vdc) / Supply (12 Vdc).
(1 Alimentador Ref. 88401 cada 6 lectores)/(1 Power supply Ref. 88401 is required for each 6 readers).
Sa, Sb: Entrada de datos / Data input.
Ab, Ab:Control abrepuertas
(12 Vdc 500 mA. máx)
/Electric lock control
(12 Vdc 500mA max).
-, B: Pulsador abrepuertas (N.O.) /Exit button (N.O.).
-, S: Detector puerta abierta (N.C.)/Door Open sensor (N.C.).
A la Unidad Central MDS DIGITAL
To the MDS DIGITAL Central Unit
Access number microswitches codification on the back side.
Be sure that there are not repeated access numbers.
Microswitches from 1 to 5 have to be configured deppending on the corresponding
access number.
Microswitch 6 has no function in these readers.
Microswitch 7 & 8, electric lock operating time if it’s connected directly to the reader.
See drawings above.
NOTAS / NOTES
* Recuerde que es posible conectar hasta 32 lectores.
* Los abrepuertas (12 Vdc 500 mA.) pueden conectarse directamente en el lector y para instalaciones de máxima seguridad utilice Decoder de Relés.
* Solicite el Manual de Programación MDS-DC, para más detalles.
Para introducir un CODIGO de Usuario:
To input the User CODE:
«0 + CODIGO/CODE»
123
456
789
A0 B
Ref. 23291
123
456
789
A0 B
LCD DIGITAL SYSTEM
Ref. 23411

Other manuals for Fermax MDS Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fermax MDS Series and is the answer not in the manual?

Fermax MDS Series Specifications

General IconGeneral
BrandFermax
ModelMDS Series
CategoryIntercom System
LanguageEnglish

Related product manuals