Print Instructions for Print Vendors (Paper Manuals)
OPERA
TOR’S
MANUAL
TOTAL PAGE COUNT: Less than 80
Paper Size: • 11 x 17
• Body - 50 lbs brilliant white offset or equivalent.
• Cover - on 80 lbs coated cover stock
(NOTE: If total order quantity is less than 100 pieces, use uncoated cover stock)
Press: • Body - 1-color, 2-sided
• Cover - 1-color, 2-sided
Bindery: • Staple (2X), Face Trim
TOTAL PAGE COUNT: 80 or greater
Paper Size: • 8-1/2 x 11
• Body - 50 lbs brilliant white offset or equivalent.
• Cover - on 80 lbs coated cover stock
(NOTE: If total order quantity is less than 100 pieces, use uncoated cover stock)
Press: • Body - 1-color, 2-sided
• Cover - 1-color, 2-sided
Bindery: • Perfect Bind, Face Trim (3 knife)
GENERAL
COVERS: • Covers are located at the beginning of this package.
• Back cover is the page IMMEDIATELY AFTER the front cover.
• Limited Warranty Statement is the page IMMEDIATELY AFTER the back cover and must be printed
on the inside of the back cover.
• Check the front cover for the individual part number (typically a 2_____ or 502_____ number).
• Check the front cover for the document number (TP 1xx - xxxx - xx - xx - xx)
BODY: •ODD number pages are ALWAYS right hand pages, and EVEN number are ALWAYS left hand
pages.
General: • This instruction page is NOT part of the manual and must NOT be printed.
• Pages labeled with the text “THIS PAGE INTENTIONALLY BLANK” are placement pages ONLY,
and should NOT be printed.
If you have any further questions regarding this manual, please contact Ken Cehonski in
Ferris Industries Engineering Department at (315) 495-0100 ext. 249.
To Next Page
Need help?
General
