Ferris IS2000Z Series User Manual

5
Operator Safety
Enclosed Areas
Only operate this unit outdoors and
away from unventilated areas such as
inside garages or enclosed trailers.
The engine emits poisonous carbon
monoxide gas and prolonged exposure
in an enclosed area can result in
serious injury or death.
Fuel and Maintenance
Always disengage all drives, shutoff the engine, and
remove the key before doing any cleaning, refueling, or
servicing.
Gasoline and its vapors are extremely flammable. Do not
smoke while operating or refueling. Do not add fuel while
engine is hot or running. Allow engine to cool for at least
3 minutes prior to adding fuel.
Do not add fuel indoors, in an enclosed trailer, garage,
or any other enclosed area that is not well ventilated.
Gasoline spills should be cleaned up promptly and before
operation begins.
Gasoline should be stored only in sealed containers
approved for fuel.
Proper maintenance is critical to the safety and
performance of your unit. Keep the unit free of
grass, leaves, and excess oil. Be sure to perform the
maintenance procedures listed in this manual, especially
periodically testing the safety system.
Not for
Reproduction

Ferris IS2000Z Series Specifications

General

Brand	Ferris
Model	IS2000Z Series
Category	Lawn Mower
Language	English

Summary

Operator Safety

Slope Operation Safety

Guidelines for safe operation on slopes to prevent rollovers.

General Operating Safety

Key safety rules and precautions before operation.

Roll Bar and Seat Belt Safety

Proper use, inspection, and maintenance of ROPS and seat belt.

Safety Decal Locations

Location of safety decals for hazard identification.

Safety Interlock System

Checks and functions of safety interlock switches.

Features & Controls

Identification Number Location

Location of model and serial number tags for reference.

Control Functions and Locations

Description and location of all operator controls and their functions.

Operation

Checks Before Starting

Pre-operation checks for safe and proper function.

Starting and Stopping the Engine

Procedures for starting, warming up, and shutting down the engine.

Zero-Turn Driving Practice

Techniques for smooth acceleration, steering, and maneuvering.

Mowing Operations

Steps for mowing, recommendations, and patterns.

Storage Procedures

Proper procedures for storing the unit temporarily or long-term.

Regular Maintenance

Maintenance Schedule

Recommended maintenance tasks based on operating hours.

Tire Pressure and Fueling

Checking tire pressure and proper fueling procedures.

Engine Oil and Filter Service

Procedures for changing engine oil and oil filter.

Battery Maintenance

Cleaning battery terminals and cable maintenance.

Blade Inspection and Servicing

Inspect, sharpen, balance, and reinstall mower blades.

Troubleshooting, Adjustment & Service

Troubleshooting Issues

Diagnosing and resolving common problems with the rider and mower.

Common Cutting Problems

Identifying and correcting issues like streaking or scalping.

Adjustments and Settings

Procedures for adjusting seat, levers, suspension, and mowing height.

Component Service and Replacement

Steps for belt replacement, battery service, and jump starting.

Slope Identification Guide