page 3 of 8
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ...............................................................................................2
SPECIFICATIONS ...........................................................................................................................2
FEATURES ....................................................................................................................................2
WATER QUALITY REQUIREMENTS ................................................................................................ 2-3
OPERATIONAL/FUNCTIONALITY ....................................................................................................3
INSTALLATION .............................................................................................................................4
MAINTENANCE AND TROUBLESHOOTING ......................................................................................5
WARRANTY AND PRODUCT REGISTRATION .....................................................................................6
IMPORTANT SAFETY INSTRUCTIONS
Before installing the CLEARWAVE
®
Water Conditioner, inspect the unit for any signs of damage.
WARNING -
P/N 46402200 Rev F 04/17
INPUT VOLTAGE
(VAC)
CURRENT
(mA)
VOLTAGE-AMPS
(VA)
POWER FACTOR
(PF)
POWER
(Watts)
18.8 21 0.453 0.44 0.2
SPECIFICATIONS
FEATURES
Thank you for purchasing the CLEARWAVE
®
Water Conditioner. This Water Conditioner embodies unique
electro-wave technologies not found in any other water conditioner. The CLEARWAVE
®
electro-wave
technology signifi cantly reduces the molecular bonding presence of calcium and magnesium concentrations,
both expressed as calcium carbonate within treated water thus reducing the hardness value of water.
• No need to purchase expensive reverse osmosis system
• No need to add monthly salt pellets to water softening system
• Scale build up on pipes, valves, water heaters, appliances, faucets,
sinks and toilets will dissolve over
time
• Enables soap and detergents to better lather and rinse
• Maintenace free
• No plumbing required
WATER QUALITY REQUIREMENTS
The current practice of determining water hardness is the measurement of the concentration of calcium and
magnesium in the water. The traditional water softener removes the calcium and magnesium from
the
wa
ter through a process called ion exchange, which will show a change in hardness using the
cur
rent practice from measuring water hardness. The
CLEARWAVE
does not remove any
calci
um or magnesium ions from the water, therefore, testing the water before and after the installa-
tion of the CLEARWAVE will not show any change in water hardness. The best method of evaluation is to
monitor the effects the CLEARWAVE has on scale forming areas such as: the effects on humidifi er media
pads scaling, showerhead scaling, toilet bowl scaling and the amount of soap needed to do the laundry.
Always unplug power adapter from standard electrical wall outlet prior to servicing
unit. Do not operate this device with damaged power cable and/or damaged plug-in
power supply (transformer). Do not immerse this device in water, as permanent damage
will occur. Do not open thermally sealed plastic housing to access internal electronics.
To Next Page
Loading...
Need help?
General