2
Warning
This document is accurate for current revisions of the Loudbox Performer and all
revisions of the Loudbox 100. Older revisions of the Loudbox Performer use a differ-
ent Head Cap Chassis and are not compatible with this document. Current revisions
of the Performer have a headphone output on the Head Cap. If you have an older
model, without the headphone output, please contact support@fi shman.com for
more information before proceeding with this repair.
Required Tools & Parts
4mm Hex Wrench, #2 Phillips Screwdriver
Loudbox Performer Head Cap Chassis - P/N ACC-000-000 or Loudbox 100 Head Cap Chassis - P/N ACC-000-000
Remove Head Cap Chassis
1. Using a 4mm hex wrench, remove the (6) bolts (red arrows) securing the Head Cap Chassis.
2. Lift Head Cap Chassis Straight up from cabinet
and place on side as shown.
LOUDBOX 100 & LOUDBOX PERFORMER
HEAD CAP CHASSIS REPLACEMENT
To Next Page
Need help?
General
