431-LS00-00-QS Rev 120 Nov 2014
LS-Series Quick Start Guide
Power Button – The LS-Series camera has three power states:
On, Off, and Auto Shutdown.
• On – Takes approximately 4 seconds (during bootup the FLIR
splash screen is shown on the eyepiece display).
• Off – Push the power button to turn the camera off.
• Auto Shutdown - If no buttons are pushed for about five minutes,
Auto shutdown 30s, is shown in the display and after counting
down for 30 seconds the camera will turn off.
Important: Read the Laser Safety guidelines in the User Manual before
operating the camera.
Display Brightness – If camera is On, press to toggle through five
brightness settings. Press and hold to turn on Laser symbol in
viewfinder, followed by Laser turning on ~1 second later. If camera is
Off, press and hold to turn on the Laser Pointer.
White/Black Hot/Instalert – In White Hot, hotter items appear as
white or light grey. In the Black Hot, hotter items appear as black or
dark grey. In Instalert, hot items in a scene are highlighted in red.
Zoom – Quick press causes the image to zoom in or out. Press and
hold to turn on Continuous E-zoom feature (LSXR models only);
camera will zoom in or out gradually until the button is released. Press
any other button to disable Continuous E-zoom mode.
Diopter Controls – The diopter adjustment knob allows adjustment of
the eyepiece for optimal viewing.
Power
Zoom
White hot/
Display Brightness /
Black hot/
Eyepiece
Laser Pointer On/Off
Adjustable
Diopter
Instalert
Laser Aperture
USB/Charging/
Analog video out
of USB port
Charging
Indicator
431-LS00-00-QS LS-Series Quick Start Guide.fm Page 1 Friday, December 5, 2014 11:37 AM
To Next Page
Need help?
General
