Maintenance
and care
234
To remove the headlamp bulb:
1. Make sure that the headlamp
control is in OFF position.
2. Open the hood.
3. Rotate the bulb cover
counterclockwise and remove.
4. Swivel the wire clip to the side
and pull out the lamp.
5. Remove bulb from electrical
connector.
6. Install in reverse order.
Replacing front parking
lamp/turn signal bulbs
1. Make sure the headlamp control
is in OFF position.
2. Open the hood and remove the
bulb socket from the grille by
turning counterclockwise.
To Next Page
Need help?
General
