Ford 2004 Ranger User Manual

SAFETY AND ENVIRONMENT PROTECTION
Warning symbols in this guide
How can you reduce the risk of personal injury and prevent possible
damage to others, your vehicle and its equipment? In this guide, answers
to such questions are contained in comments highlighted by the warning
triangle symbol. These comments should be read and observed.
Warning symbols on your vehicle
When you see this symbol, it is
imperative that you consult the
relevant section of this guide before
touching or attempting adjustment
of any kind.
Protecting the environment
We must all play our part in
protecting the environment. Correct
vehicle usage and the authorized
disposal of waste, cleaning and
lubrication materials are significant
steps towards this aim. Information in this respect is highlighted in this
guide with the tree symbol.
BREAKING-IN YOUR VEHICLE
Your vehicle does not need an extensive break-in. Try not to drive
continuously at the same speed for the first 1,600 km (1,000 miles) of
new vehicle operation. Vary your speed to allow parts to adjust
themselves to other parts.
Drive your new vehicle at least 800 km (500 miles) before towing a
trailer.
Do not add friction modifier compounds or special break-in oils during
the first few thousand kilometers (miles) of operation, since these
additives may prevent piston ring seating. See Engine oil in the
Maintenance and specifications chapter for more information on oil
usage.
2004 Ranger (ran)
Owners Guide (post-2002-fmt)
USA English (fus)
Introduction
5

Ford 2004 Ranger Specifications

General

Brand	Ford
Model	2004 Ranger
Category	Automobile
Language	English

Summary

Instrument Cluster

Warning Lights and Chimes

Explains dashboard warning lights and chimes indicating vehicle status and potential issues.

Lights

Headlamp Control

How to operate headlights: off, parking lamps, low beams, and high beams.

Headlamp Aim Adjustment

Step-by-step guide for adjusting the vehicle's headlamp aim.

Driver Controls

Multi-Function Lever

Operation of windshield wipers and washers using the multi-function lever.

Speed Control

How to use cruise control: setting, increasing, reducing, and turning off speed.

Setting Speed Control

Step-by-step guide for setting and engaging the speed control system.

Locks and Security

How to reprogram your remote entry transmitters

Procedure for reprogramming remote entry transmitters.

SECURILOCK PASSIVE ANTI-THEFT SYSTEM

Explanation of the vehicle's passive anti-theft engine immobilization system.

Seating and Safety Restraints

Safety restraints precautions

Important safety advice and precautions for using vehicle safety restraints.

Combination lap and shoulder belts

How to fasten and unfasten the combination lap and shoulder belts.

Front safety belt height adjustment

How to adjust the shoulder belt height for optimal fit and safety.

Children and air bags

Crucial safety information regarding the interaction of children and airbags.

How does the air bag supplemental restraint system work?

Explanation of the SRS activation, deployment, and system components.

Driving

STARTING

Explains ignition positions and procedures for starting the vehicle.

Important safety precautions

General safety precautions to follow before and during driving.

BRAKES

Information on normal brake noise and potential issues.

Four-wheel anti-lock brake system (ABS)

Explanation of the ABS system, how to use it, and its warning lamp.

MANUAL TRANSMISSION OPERATION

How to operate the vehicle's manual transmission and clutch.

FOUR-WHEEL DRIVE (4WD) OPERATION

Explanation of 4WD system operation, indicators, and shifting procedures.

Tires, Replacement Requirements

TRAILER TOWING

Roadside Emergencies

HAZARD FLASHER

FUEL PUMP SHUT-OFF SWITCH

FUSES AND RELAYS

CHANGING THE TIRES

JUMP STARTING YOUR VEHICLE

WRECKER TOWING

Maintenance and Specifications

PRECAUTIONS WHEN SERVICING YOUR VEHICLE

ENGINE OIL

ENGINE COOLANT

WHAT YOU SHOULD KNOW ABOUT AUTOMOTIVE FUELS

On board diagnostics (OBD-II)

TRANSMISSION FLUID

Tire wear