3. Hold the nozzle in position B during
refilling. Holding the nozzle in position
A may affect the flow of fuel and shut
off the fuel nozzle before the fuel tank
is full.
4. Operate the nozzle within the area
shown.
5. Slightly raise the fuel nozzle to remove
it.
FUEL CONSUMPTION
Note: The amount of usable fuel in the
empty reserve varies and should not be
relied upon to increase driving range. When
refueling your vehicle after the fuel gauge
indicates empty, you might not be able to
refuel the full amount of the advertised
capacity of the fuel tank due to the empty
reserve still present in the tank.
The CO2 and fuel consumption figures are
derived from laboratory tests according to
Regulation (EC) 715/2007 and subsequent
amendments are carried out by all vehicle
manufacturers.
They are intended as a comparison
between makes and models of vehicles.
They are not intended to represent the real
world fuel consumption you may get from
your vehicle. Real world fuel consumption
is governed by many factors including:
driving style, high speed driving, stop-start
driving, air conditioning usage, the
accessories fitted, payload, towing, etc.
The advertised capacity is the indicated
capacity and the empty reserve combined.
Indicated capacity is the difference in the
amount of fuel in a full tank and a tank
when the fuel gauge indicates empty.
Empty reserve is the amount of fuel in the
tank after the fuel gauge indicates empty.
Filling the Tank
For consistent results when refueling:
• Switch the ignition off before refueling.
An inaccurate reading results if you
leave the engine running.
• Use the same fill rate
(low-medium-high) each time the tank
is filled.
• Allow no more than two automatic
shut-offs when refueling.
Results are most accurate when the
refueling method is consistent.
102
B-MAX (CB2) Vehicles Built From: 25-06-2012, Vehicles Built Up To: 31-12-2013
Fuel and Refueling
To Next Page
Loading...
Need help?
General
