Ford Ranger 1998 User Manual

Intake Manifold—Lower
Removal
1. Disconnect the battery ground cable. Refer to Section 414-01.
2. Drain the cooling system. Refer to Section 303-03.
3. Disconnect the crankcase ventilation tube (6758) from the air cleaner outlet tube (9B659).
4. Disconnect the electrical connector from the mass airflow (MAF) sensor (12B579).
5. Disconnect the electrical connector from the intake air temperature (IAT) sensor (12A697).
6. Disconnect the harness locator from the air cleaner outlet tube.
7. Remove the air cleaner outlet tube.
8. Loosen the accessory drive belt and remove from the generator pulley (10344).
SECTION 303-01B: Engine — 3.0L 1998 Ranger Workshop Manual
IN-VEHICLE REPAIR
Procedure revision date: 03/03/2000
Special Tool(s)
Fuel Pressure Gauge
T80L-9974-B
16
1998 Ranger Workshop Manual
11/21/2009
http://www.fordtechservice.dealerconnection.com/pubs/content/~WSWL/~MUS~LEN/21
...

Ford Ranger 1998 Specifications

General

Brand	Ford
Model	Ranger 1998
Category	Automobile
Language	English