Name: Fostex D-80
Brand: Fostex
Rating: 4 (1 reviews)

To Next Page

Safety Instructions2
How to Use a Dust Cap3
Table of Contents6
Precautions9
Main Features12
Front Panel and Rear Panel16
Names and Functions17
Remote Controller18
Lock/Unlock Key18
Record Track Select Key (Record Track)18
Auto Play/Auto Return Key18
Clipboad in Key (Clipboard In)19
Clipboard out Key (Clipboard Out)19
Auto Return Start Key (Auto RTN Start)20
Auto Return End Key (Auto RTN End)20
Auto Punch in Key (Auto Punch In)20
Auto Punch out Key (Auto Punch Out)20
Execute/Yes Key (Execute/Yes)21
Exit Key/No Key (Exit/No)21
Recall Key (Recall)21
Store Key (Store)22
Hold/Digit Move Key (Hold/)22
Jog/Shuttle Dial22
Redo23
Undo Key23
Erase Key23
Paste Key/Move Key23
Copy Key24
Auto Punch Mode On/Off Key24
Locate Key24
Record Button25
Stop Button25
Play Button25
Rewind Button26
Fast Forward Button26
Locked LED26
Hard Disk Access LED26
Rear Panel27
Data Input Conector27
Data Output Connector27
MIDI Input/Output/Thru Connector27
Display Section28
Display Shown When the Power Is Turned on28
Preset Display28
Switching the Display Using the DISP SEL Key29
Switching the Time Base Display Using the Execute/Yes Key30
Changing Programs Using the Store Key and the Hold/ Key31
Warning Messages32
Before Operating35
Difference between a Tape-Based Multitracker/Hard Disk Multitracker35
Input Monitor and Repro Monitor36
Time Base37
Replacing the Hard Disk38
Installing an Encased Hard Disk39
Installing a Hard Disk in Removable Case40
Formatting a Hard Disk41
Extending the Remote Controller42
Recording/Playback44
Basic Connections44
The Default Settings46
Recording an Analog Signal47
Basic Recording and Playback47
Recording While Using the Program Change Function49
Changing Programs49
Multitrack Recording Using Overdubbing51
Selecting a Recording Track51
Adjusting the Recording Level (Rehearsal)51
Start Overdubbing51
Mixdown52
Recording a Digital Signal53
Recording Digital Data from an External Digital Device to the Unit53
Selecting a Recording Program53
Starting/Finishing Recording54
Recording Digitally from the Unit to an External Digital Device55
Application Guide56
Ping-Pong Recording56
MIDI Clock Synchronization System57
Creating a Tempo Map58
Overdubbing58
Mixdown While Synchronizing the MIDI Sound Source58
MTC Synchronization/Machine Control System59
Connecting an External Device60
Setting the MIDI Sync out60
Setting Frame Rate60
Setting Device ID Number/Checking Synchronization and Machine Control60
Synchronizing Multiple Units in Slave Mode61
Setting the DMT-8 MIDI Sync out61
Setting the DMT-8 Frame Rate62
Setting the Unit's MTC Offset and Frame Rate62
Setting Slave Mode on the Unit62
Checking the Sync Operation62
Machine Control 24-Track System63
Setting the MIDI Device ID64
Setting Slave Mode64
Setting MIDI Sync out65
Punch In/Out66
Auto Punch In/Out67
Storing the Punch In/Punch out Point67
Auto Punch In/Out Rehearsal Mode69
Auto Punch In/Out Take Mode (Actual Recording)71
Take Mode (Auto Punch In/Out)71
Undo/Redo of Auto Punch in71
Punch In/Out Recording Dusing a Foot Switch72
Punch In/Out Rehearsal (Using a Foot Switch)73
Rehearsal Mode (Manual Punch In/Out)73
End of Rehearsal73
Punch In/Out Take (Manual Punch In/Out)74
Locate Function76
Auto Play Mode77
Auto Return Mode77
Setting the Auto Return Start/End Point78
Editing and Storing the Start/End Point79
Changing the Stored Start/End Points80
Auto Repeat81
Edit Function82
Difference between Copy and Paste and Move and Paste82
Copy and Paste83
Entering and Storing the Clipboard in Point83
Entering and Storing the Clipboard out Point84
Copying the Track Data after Storing the Clipboard In/Out Points84
Copy and Pasting85
Listening to Sound Data Copied on the Clipboard85
Entering and Storing the Paste Punch in Point86
Executing the Paste Operation86
Copy and Paste Undo/Redo87
Move and Paste88
Move and Pasting90
Move and Paste Undo/Redo92
Erase and Cut93
Entering and Storing the Erase Punch in (Start) Point94
Entering and Storing the Erase Punch out (End) Point94
Undo/Redo the Erase Operation95
Cutting95
Entering and Storing the Cut Punch in (Start) Point95
Undo/Redo the Cut Operation96
Executing the Cut Operation96
Setup Mode97
Setting the Time Signature ("Bar")102
To Modify/Delete a Stored Time Signature102
Tempo Setting ("Tempo")103
To Clear All Stored Tempo Data104
Metronome Function On/Off ("Click" On/Off)105
Saving and Loading the Recordings ("Save", "Load")106
Connecting a DAT Machine to Save/Load Data107
Saving Data to a DAT Machine (Save)108
Loading Data from a DAT Machine (Load)109
Formatting the Hard Disk ("Format")111
Setting the Preroll Time for the Locate Opration ("Preroll Time")112
Selecting the Synchronized Signal Output from the MIDI out Connector113
Setting the MTC Frame Rate ("Frame Rate")114
Setting MTC Offset Time ("MTC Offset")115
Setting Recording Enable/Disable Mode ("Rec" Enable/Disable)116
Setting a Digital Input Channel ("Dg In")117
Setting a Digital Output Channel ("Dg Out")119
Setting Display Resolution Mode On/Off ("Resolu")120
Setting Slave Mode On/Off ("Slave')121
Setting MIDI Device ID ("Device")122
Setting the Undo Function Range ("Undo")123
MMC Command List125
Inquiry Message List125
Fostex MIDI System Exclusive Message Format126
Status Request127
Explanation on Read/Write into the Various Edit Point Memory127
Data Type128
Explanation on the Command/Mode Set129
The Status Request Command132
Explanation on the Status Reply134
Maintenance136
Specifications136
Index138

Brand	Fostex
Model	D-80
Category	Recording Equipment
Language	English

Fostex D-80 User Manual

Table of Contents

Questions and Answers:

Fostex D-80 Specifications

Related product manuals