NOTE
Use care while pulling the water tube
from the door to be sure that tube does
not kink.
NOTE
Approximately four feet of water tube
will be pulled from the refrigerator door.
10
DOOR REMOVAL
Getting through narrow spaces
If refrigerator will not fit through an
entrance area, doors can be removed.
Check first by measuring the entrance.
To prepare for removing the doors:
1. Make sure the electrical power cord
is unplugged from the wall outlet.
2. Remove any food from the door
shelves and close the doors.
To remove the refrigerator doors:
1. Open doors to 90°.
2. Remove all five Phillips
TM
screws
from top hinge cover and lift up.
Top
Hinge
Cover
5. Pull up on water line gently to
remove from door.
Waterline
3. Trace lightly around the door’s top
hinges with a pencil. This makes
reinstallation easier.
4. Disconnect electrical harness
running from door to hinge cover.
6. Remove three 8 mm bolts from both
top hinges. Lift doors up o lower
hinges and carefully set aside.
x2
CAUTION
Be sure doors are set aside in a secure
position where they cannot fall and cause
personal injury, or damage to the doors or
handles.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
