30
Brightness
Sets the brightness of the entire image. Specify the brightness as a number within the
range of 1 (dark) to 128 (bright). To brighten the entire image, increase the value of the
setting. To darken the entire image, decrease the value.
Contrast
Sets the contrast between light and shadow of the scanned image. Specify the contrast
as a number within the range of 1 (low [soft]) to 100 (high [sharp]). Increasing this
value makes the contrast sharper.
Paper Source
Selects the scanning method.
"Layout" tab
Paper Size
Selects a paper size according to the size of the document to be scanned. Select a stan-
dard paper size from the list.
Paper Layout
Specifies orientation of the documents as portrait or landscape.
Automatic Automatically switches the method between ADF scanning
and flatbed scanning.
ADF Scans documents using the automatic document feeder
(ADF).
Flatbed Scans documents using the flatbed.
To Next Page
Loading...
Need help?
General