Fujitsu ASY12FSBCW User Manual

En-7
TIMER OPERATION
To Use the OFF TIMER
1
Press the START/STOP button (Fig. 6 R)
(if the unit is already operating, proceed to step 2).
The Indoor Unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.
2
Press OFF TIMER button (Fig. 6 M) to select the de-
sired times.
Press OFF TIMER button to change from temperature setting to timer dis-
play.
Each time the button is pressed, the time changes in the following order:
Set the time while the OFF TIMER mark (
) on the Remote Con-
troller’s display is flashing. (The flashing will continue for about 30
seconds)
3
Press SET button (Fig. 6 O) to select OFF TIMER op-
eration.
The OFF Timer Mark ( ) will be shown on the Remote Controller’s
display.
The Indoor Unit TIMER Indicator Lamp (green) will light.
It can not be used during ON TIMER operation.
To Use the ON TIMER
1
Press the START/STOP button (Fig. 6 R)
(if the unit is already operating, proceed to step 2).
The Indoor Unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light.
2
Press ON TIMER button (Fig. 6 N) to set the expected
time.
If ON TIMER button is pressed, it will be changed into time display from
temperature setting display.
Each time the button is pressed, the time time changes in the following
order:
Set the time while the ON TIMER mark (
)on the Remote Controller’s
display is flashing.(The flashing will continue for about 30 seconds)
3
Press SET button (Fig. 6 O) to select ON TIMER opera-
tion.
The ON Timer mark ( )will be shown on the Remote Controller’s dis-
play.
The Indoor Unit Timer Indicator Lamp(green) Will light.
It can not be used during OFF TIMER operation.
To Cancel the Timer
Press the CANCEL TIMER button.
To Change the Timer Settings
Press the ON TIMER button/OFF TIMER
button as required. Perform Use TIMER
step 2 and 3.
To Stop Air Conditioner Operation
while the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change the operating
conditions (Mode, Fan Speed, Thermostat
Setting), after making the timer setting,
wait until the entire display reappears, then
press the appropriate buttons to change to
the desired operating condition.
To Cancel the Timer
Press the CANCEL TIMER button.
To Change the Timer Settings
Press the ON TIMER button/OFF TIMER
button as required. Perform Use TIMER
step 2 and 3.
To Stop Air Conditioner Operation
while the Timer is Operating
Press the START/STOP button.
To Change Operating Conditions
If you wish to change operating conditions
(Mode, Fan Speed, Thermostat Setting),
after making the timer setting wait until the
entire display reappears, then press the
appropriate buttons to change the operat-
ing condition desired.

Fujitsu ASY12FSBCW Specifications

General

Brand	Fujitsu
Model	ASY12FSBCW
Category	Air Conditioner
Language	English