Fujitsu fi-5220C Cleaning Instructions

Turn the Scanner ON while cleaning the following locations
Using cleaning paper moistened with F1 Cleaner
January 2007
Cleaning Instructions for fi-5220C Flatbed ScannerFujitsu Europe LImited
For further information please refer to the
fi-5220C Image Scanner Operators Guide
which can be found on our Website:
www.fel.fujitsu.com/scanner
2
3
4
1
5
Pad Assy
Plastic
Rollers
Pick Roller
Feed Rollers
Glass
5
Clean lightly taking care not to roughen the surface.
Feed Rollers x 2
1
2
“Send to” Button “Scan” Button
Open the ADF only if the Function Number Display is showing “1”
through “9”.
Simultaneously hold down the “Send to” and “Scan”
buttons on the operator panel. The Feed Rollers will
rotate slowly each time buttons are pressed
Hold a soft dry, moistened cleaning paper against the
surface of the rotating rollers, lightly cleaning the
surface.
As a guideline, 7 presses of the “Send to” and
“Scan” buttons make the rollers rotate one full turn.

Fujitsu fi-5220C Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	24 bit
Maximum scan size	210 x 297 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	2 sec/page
Scanner type	Flatbed & ADF scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	SCSI, USB 2.0
Bundled software	-FJ TWAIN driver. -Scandall. -Adobe Acrobat. -ISIS Driver. -QuickScan (demo). -Soft IPC (demo). -VRS 4.1 Basic.
Dimensions (WxDxH)	302 x 569 x 229 mm
Power requirements	100-240 VAC
Power consumption (standby)	6 W
Power consumption (typical)	34 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Weight	8400 g