Fujitsu fi-6110 Getting Started Guide

Getting Started
Getting Started
fi
-
6110 Image Scanner
fi
-
6110
Image Scanner
1
Thank you for purchasing fi-6110 Color Image Scanner (hereinafter referred to as "the scanner").
This manual describes the preparation required for use of the scanner. Follow the preparation procedures
described in this manual.
Make sure to read the "Safety Precautions" document provided with the scanner before use. For details
about scanner functions and features, basic operation, daily care, consumable replacement and
troubleshooting, refer to the "Operator's Guide" (PDF). The "Operator's Guide" is displayed by clicking
[USER'S GUIDE] J [Operator's Guide] on the supplied Setup DVD-ROM.
July 2010
<Trademarks and registered trademarks>
Microsoft, Windows, Windows Server, Windows Vista, and SharePoint are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
Intel, Pentium, and Intel Core are trademarks or registered trademarks of Intel Corporation in the United
States and other countries.
ISIS and QuickScan are either registered trademarks or trademarks of EMC Corporation in the United
States.
Adobe, the Adobe logo, and Acrobat are either registered trademarks or trade names of Adobe Systems
Incorporated in the United States and/or other countries.
Other company names and product names are the registered trademarks or trademarks of the respective
companies.
All Rights Reserved, Copyright© PFU LIMITED 2010
Checking the Components
Make sure that all items shown below are included in the package. If any other packaging is provided, make
sure to store it as well. Make sure to handle the components with care.
The box and packaging materials are required for storage and transportation of the scanner. Do not throw
them away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
Scanner (× 1)
USB Cable (× 1)AC Cable (× 1)
ADF Paper
Chute (× 1)
Setup DVD-ROM (× 1)
AC Adapter (× 1)
Carrier Sheet (× 1)
Getting Started
(this manual) (× 1)
Safety Precautions (× 1) Adobe
®
Acrobat
®
DVD-ROM (× 1)
QuickScan™ Pro brochure (× 1)
Note: The contents may vary depending on the country.
P3PC-3002-01EN

Fujitsu fi-6110 Specifications

General

Film scanning	No
Color scanning	Yes
Grayscale levels	1024
Input color depth	24 bit
Maximum scan size	216 x 355.6 mm
Optical scanning resolution	600 x 600 DPI
Flatbed scan speed (b/w, A4)	3 sec/page
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	500 sheets
USB version	2.0
Standard interfaces	USB 2.0
Scan media weight	52 - 127 g/m²
Dimensions (WxDxH)	292 x 143 x 130 mm
Power requirements	100 - 240 V, 50/60 Hz
Image formats supported	JPG, TIF
Recommended media weight	80 g/m²
Compatible operating systems	Microsoft Windows 7 (32bit/64bit)/Vista (32bit/64bit), Windows Server 2003/2008/2008 R2 (32bit/64bit), Windows XP (32bit/64bit).
Power supply type	AC
Power consumption (standby)	5.36 W
Power consumption (typical)	28 W
Operating temperature (T-T)	42 - 95 °F
Operating relative humidity (H-H)	20 - 80 %
Bundled software	TWAIN, ISIS, ScandAll PRO, Adobe Acrobat, QuickScan Pro.

Weight and Dimensions

Depth	143 mm
Width	292 mm
Height	130 mm
Weight	3000 g