Fujitsu PRIMERGY TX1330 M3 User Manual

TX1330 M3 Operating Manual 25
Functional overview
Slots
Drive bays
Operating Panel
PCI-Express Gen3 x1 1x (up to 167 mm length)
PCI-Express Gen3 x4 1x (up to 167 mm length)
PCI-Express Gen3 x8 2x (up to 240 mm length)
Slot notes In SAS configuration 1x PCI-Express occupied by
modular RAID controller.
Hard disk bay
configuration
4x / 8x / 12x 3.5-inch, for SAS / SATA or 8x / 16x /
24x 2.5-inch for SAS/SSD optional
Accessible drive bays 3 x 5.25/1.6-inch
Notes accessible drives all possible options described in relevant system
configurator
Operating buttons On/off button
ID button
NMI button
Reset button
Status LEDs Global error indicator (orange)
ID indicator (blue)
HDD activity indicator (green)
Power-on indicator (green)
AC connected indicator (green)
CSS indicator (yellow)
Status LED at system
rear side:
Global error / CSS / ID indicator (orange / orange /
blue)
LAN connection indicator (green)
LAN speed indicator (green / yellow)

Fujitsu PRIMERGY TX1330 M3 Specifications

General

Processor socket	-
Built-in processor	No
Motherboard chipset	Intel® C236
Compatible processor series	Intel Core i3, Intel Pentium Dual-Core, Intel Xeon
Number of processors supported	1
ECC	Yes
Number of DIMM slots	4
Supported memory types	DDR4-SDRAM
Maximum internal memory	64 GB
Storage drive sizes supported	2.5, 3.5 \
Supported storage drive types	HDD & SSD
Number of storage drives supported	24
Supported storage drive interfaces	Serial ATA, Serial Attached SCSI (SAS)
LAN controller	Intel I210
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	2
PCI Express slots version	3.0
Chassis type	Rack (4U)
Product color	Black, Red