Plastic Rollers
Feed Rollers
White Sheets
Glass
Pick Roller
Pad Assy
EjectRollers
Cleaning Instructions for
ScanSnap S300/S300M
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Consumables Part Number
Consumable Kit
CON-3360-001A
Cleaning Kit
SC-CLE-WGD
Using F1 Impregnated Cleaning Wipes
Pad Assy
Wipe downwards. When cleaning take care to prevent the cleaning wipe from catching on the
metal parts
Turn the Scanner OFF while cleaning the following locations
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Pick Roller
Clean lightly taking care not to scratch the surface.
P. T. O.
BEFORE CLEANING
Open the ADF while pulling the cover
open lever
ADF Cover
Open Lever
Plastic Rollers x 4
Clean lightly while rotating with your finger. Take care not to roughen the surface.
White Sheets x 4
White strips along the edge of the glass. Clean lightly.