Fujitsu ScanSnap S500 Cleaning Instructions

While holding down the SCAN button
Press the POWER button
Rollers will rotate
To rotate the Feed and Eject Rollers, press the POWER button while holding down the
SCAN button.
As a guideline, six presses of the POWER button make the rollers rotate one full turn.
6
5
Clean lightly taking care not to roughen the surface.
Feed Rollers x 2
Turn the Scanner ON while cleaning the following locations
Clean lightly taking care not to roughen the surface
.
Eject Rollers x 2
1
2
Using cleaning paper moistened with F1 Cleaner
For further information please refer to the
ScanSnap S500 Image Scanner Operators Guide
which can be found on our Website:
www.fel.fujitsu.com/scanner
Cleaning Instructions for ScanSnap S500Fujitsu Europe LImited
6
2
3
4
1
5
Pad Assy
Plastic
Rollers
Pick Roller
Feed Rollers
Glass
Eject Rollers

Fujitsu ScanSnap S500 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum system requirements	Windows 2000/ XP/ Vista
Scan media weight	52 - 127 g/m²
Power requirements	AC 100V - 240V, 50 / 60 Hz
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g