Fujitsu ScanSnap S510 Cleaning Instructions

Cleaning Instructions for
ScanSnap S510/S510M
It is recommended that these items be
cleaned EVERY 1,000 SCANS
Using F1 Impregnated Cleaning Wipes

Pad Assy
Wipe downwards. When cleaning take care to prevent the cleaning wipe from catching on the
metal parts


Turn the Scanner OFF while cleaning the following locations
ADF Glass Surfaces x 2
Located on the ADF cover and opposite side. Clean lightly.
Pick Roller
Clean lightly taking care not to scratch the surface.
P. T. O.

Plastic Rollers x 4
Clean lightly while rotating with your finger. Take care not to roughen the surface.




Plastic Rollers
Eject Rollers
Feed Rollers
Glass
Pick Roller


Pad Assy
BEFORE CLEANING
Open the ADF while pressing the cover open button
ADF Cover
Cover Open
Lever
Paper Chute
Cover
Consumables Part Number
Consumable Kit
CON-3360-001A
Cleaning Kit
SC-CLE-WGD

Fujitsu ScanSnap S510 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Scanner type	Sheet-fed scanner
Sensor type	CCD
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	50 sheets
USB version	2.0
Standard interfaces	USB 2.0
Minimum storage drive space	512 MB
Minimum system requirements	Windows 2000/ XP/ Vista
Sustainability certificates	ENERGY STAR
Power requirements	AC 100V to 240V, 50 / 60 Hz
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	2700 g