Furuno 1623 Operator's Guide

MODEL 1623 MARINE RADAR
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information see the Operator's Manual.
ESC
MENU
MODE
GAIN
ALARM
RANGE
MARKPROG
POWER
BRILL
MODEL 1623
MARINE RADAR
FURUNO
1
2
3
5
6
7
8
9
4
3 Opens/closes menu; escapes from current operation.
2 Selects display mode.
1 Selects menu items; adjusts VRM, EBL and cursor.
4 Selects basic display range.
5 Adjusts gain.
6 Enables/disables guard alarm.
9 Long press: Turns power on/off.
Momentary press: Adjusts display contrast and brilliance.
7 Outputs L/L position to external equipment; registers
selected position as waypoint.
8 Menu short cut.
Turning the Power On/Off
Turning on the power: Press the
[POWER/BRILL] key more than one second
to turn on the power.
Turning off the power: Press the
[POWER/BRILL] key until the screen goes
blank.
Adjusting Tone and Brilliance
1. Press the [POWER/BRILL] key
momentarily to show the
brilliance/contrast adjustment window.
CONT: 4
LOW HIGH
BRILL:
LOW HIGH
9
BRILL/CONTRAST
TX/STBY - PRESS [MODE]
[MENU/ESC] : Exit.
2. Contrast: Press left or right arrow
Brilliance: Press up or down arrow.
3. Press the [MENU/ESC] key to finish.
Transmitting, Standby
1. Press the [POWER/BRILL] key
momentarily to show the
brilliance/contrast adjustment window.
2. Press the [MODE] key to go to standby
and transmit alternately.
3. Press the [MENU/ESC] key to finish.
Choosing the Range
Press the [RANGE+] or [RANGE-] key to
select a range.

Furuno 1623 Specifications

General

Brand	Furuno
Model	1623
Category	Marine Radar
Language	English