SAFETY INSTRUCTIONS....................... i
SYSTEM CONFIGURATION ................. iii
EQUIPMENT LISTS .............................. iv
1. MOUNTING ........................................ 1
1.1 Monitor Unit/Control Unit..........................2
1.2 Transceiver Unit .......................................7
1.3 Hull Unit ...................................................8
1.4 Interface Unit..........................................26
1.5 Motion Sensor MS-100 (option).............27
2. WIRING ............................................ 28
2.1 Wiring among Units................................28
2.2 Transceiver Unit .....................................31
2.3 Hull Unit .................................................34
2.4 Interface Unit..........................................35
3. ADJUSTMENTS ............................... 36
3.1 General Checks..................................... 36
3.2 TX Frequency Checking........................ 37
3.3 Heading Adjustment/Soundome
Setting .................................................. 39
3.4 Adjustment of Motion Sensor ................ 42
3.5 System Back Up.................................... 43
3.6 Setting of Interface Unit......................... 45
4. INPUT/OUTPUT DESCRIPTION ...... 46
APPENDIX 1 HOW TO MAKE THE
RETRACTION TANK FOR WOODEN
VESSEL............................................AP-1
APPENDIX 2 HOW TO INSTALL THE
RETRACTION TANK FOR WOODEN
VESSEL............................................AP-7
PACKING LISTS ................................ A-1
OUTLINE DRAWINGS ....................... D-1
INTERCONNECTION DIAGRAMS..... S-1
Installation Manual
SEARCHLIGHT SONAR
Model CH-250/CH-250S
www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
To Next Page
Need help?
General
