www.furuno.com
ll brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
CHART RADAR
Model
FAR-3210(-BB)/3220(-BB)/3310/3320/3220-NXT(-BB)/
FAR-3320-NXT/3230S(-BB)/3330S/3230S-SSD(-BB)/
FAR-3330S-SSD/3320W/3220W-BB/3330SW/3230SW-BB
(Product Name: Marine Radar)
SAFETY INSTRUCTIONS ........................i
SYSTEM CONFIGURATION ..................iv
EQUIPMENT LISTS...............................xii
1. INSTALLATION...............................1-1
1.1 Antenna Unit (X-band Radar) .............1-1
1.2 Antenna Unit (S-band Radar) .............1-7
1.3 Monitor Unit.......................................1-12
1.4 Control Unit.......................................1-13
1.5 Power Supply Unit ............................1-15
1.6 Processor Unit ..................................1-16
1.7 Transceiver Unit................................1-17
1.8 Sensor Adapters (option)..................1-18
1.9 Intelligent HUB (option).....................1-19
1.10 Switching Hub (option)......................1-20
1.11 Junction Box (option) ........................1-20
2. WIRING............................................2-1
2.1 Overview .............................................2-1
2.2 Antenna Unit (X-band, TR-UP) ...........2-5
2.3 Antenna Unit (X-band, TR-DOWN)...2-14
2.4 Antenna Unit (S-band, TR-UP) .........2-20
2.5 Antenna Unit (S-band, TR-DOWN)...2-28
2.6 Processor Unit ..................................2-34
2.7 Power Supply Unit ............................2-42
2.8 Transceiver Unit................................2-45
2.9 Monitor Unit.......................................2-51
2.10 Sensor Adapters (option)..................2-52
2.11 LAN Signal Converter Kit (option).....2-67
2.12 Junction Box (option) ........................2-73
2.13 Intelligent HUB (option).....................2-73
2.14 How to Extend the Control Unit Cable
(option)..............................................2-74
2.15 VDR Connection ...............................2-78
3. SETTINGS AND ADJUSTMENTS ..3-1
3.1 Radar Installation Menu ......................3-1
3.2 How to Align the Heading ...................3-1
3.3 How to Adjust the Sweep Timing ........3-2
3.4 How to Suppress Main Bang ..............3-3
3.5 Dual Radar Display .............................3-3
3.6 Other Settings .....................................3-6
3.7 Network Transmission Setting Between
ECDIS and Radar .............................3-13
3.8 Forwarding Distance .........................3-13
3.9 Synchronization With Ship’s Clock ...3-14
3.10 How to Change the Display Color for
Sensor Data Based on Integrity ........3-15
3.11 How to display the [Echo] page ........3-15
3.12 Web Setting Menu ............................3-16
3.13 How to Set Up the Back-up ECDIS...3-16
3.14 ICE Mode ..........................................3-16
4. INPUT/OUTPUT DATA ...................4-1
4.1 Processor Unit ....................................4-1
4.2 IEC 61162 Sentences .........................4-2
APPX. 1 JIS CABLE GUIDE............AP-1
APPX. 2 ROD TERMINALS.............AP-2
APPX. 3 DIGITAL INTERFACE.......AP-6
APPX. 4 ALERT LIST ....................AP-18
PACKING LIST(S)............................... A-1
OUTLINE DRAWING(S)...................... D-1
INTERCONNECTION DIAGRAM(S) ... S-1
Complies with IEC62923-1/2
To Next Page
Need help?
General
