1
DATA RECORDING SOFTWARE FOR PC
This application software is used for collecting data of date, time, depth, draft, latitude,
longitude, speed and course from the Navigational Echo Sounder FE-700.
The interconnection between the FE-700 and PC is as follows.
DISPLAY
UNIT
FE-701
DISTRIBUTION
BOX FE-702
EIA232-TD
EIA232-RD
GND
4
5
6
PC*
Connect to COM port.
(Either port will do)
*: Local supply
FE-700
TB1
Cable *
< <
<2< RXD
<3< TXD
<5< GND
< <
COM
Figure 1 Interconnection between FE-700 and PC
1. INSTALLATION
1.1 Installing the program
System Requirements
The DATA RECORDING SOFTWARE FOR PC runs under Windows 95/98/ME or Windows
NT4.0/2000, and also 64 MB and more of RAM are recommended.
Procedure
1. Insert the program floppy disk supplied with the DATA RECORDING SOFTWARE FOR
PC kit into your floppy disk drive.
2. Double-click the floppy disk drive icon to display files in the floppy disk.
3. Double-click the Setup.exe icon. The installation program starts and guides you through
the installation process.
4. Follow the instructions displayed on the screen. DATA RECORDING SOFTWARE FOR
PC will be installed in the folder /Program Files/Fe700/Fe700 on default.
5. Keep your original floppy disk in a safe place.
(FE-700 Optional Kit)
To Next Page
Need help?
General
