Furuno FMD-3005 - Page 42

2. WIRING
2-22
2.3.2 MC-3010A/3020D/3030D
• MC-3010A: Inputs analog signal. To set MC-3010A to the current input, connect
short pins to each terminals.
• MC-3020D: Inputs digital signal (8ch contact input). Contact or voltage input is se-
lectable (contact input requires short pins).
• MC-3030D: Outputs digital signal (8ch, normal open/close).
Fabrications
MC1.5-W-L600/1000/2000/3000 cable
(Input)
Vinyl tape
(width: 10)
Vinyl tape
(width: 10)
Vinyl tape
(width: 10)
Shield
(fold back)
Shield
(fold back)
Shield
(fold back)
Core: 6
Core: 6Core: 6
30
3030
120
120120
TTYCSLA-1 (MC-3010A)
Vinyl tape
(width: 10)
Vinyl tape
(width: 10)
Vinyl tape
(width: 10)
80
8080
60
6060
60
6060
Pass drain wire through
shrink tube (local supply),
then attach crimp-on lug
(pre-attached in unit).
Pass drain wire through
shrink tube (local supply),
then attach crimp-on lug
(pre-attached in unit).
Pass drain wire through
shrink tube (local supply),
then attach crimp-on lug
(pre-attached in unit).
Core: 6
Core: 6Core: 6
MPYC-12 cable (MC-3030D)
MC1.5-W-L600/1000/2000/3000 cable
(Output)
Vinyl tape
(width: 10)
Vinyl tape
(width: 10)
Vinyl tape
(width: 10)
Shield
(fold back)
Shield
(fold back)
Shield
(fold back)
Core: 6Core: 6Core: 6
303030
100100100
80 or
more
80 or
more
80 or
more
125125125
858585
Core: 6Core: 6Core: 6
MPYC-12 cable (MC-3020D)
TTYCS-1 (MC-3010A)
80 or
more
80 or
more
80 or
more
135135135
959595
Core: 6Core: 6Core: 6
Vinyl tape
(width: 10)
Vinyl tape
(width: 10)
Vinyl tape
(width: 10)
80 or
more
80 or
more
80 or
more
Shield
(fold back)
Shield
(fold back)
Shield
(fold back)
303030
606060
Core: 6Core: 6Core: 6
No use: 50
(Wind tape to insulate.)
No use: 50
(Wind tape to insulate.)
No use: 50
(Wind tape to insulate.)
No use: 50
(Wind tape to insulate.)
No use: 50
(Wind tape to insulate.)
No use: 50
(Wind tape to insulate.)