Furuno FR1500 Mk3 User Manual (English)

Other manuals for Furuno FR1500 Mk3

D
Daniel ValdezAug 16, 2025
What to do if Furuno Marine Radar power is on but there is no echo?
- D
  Donald PriceAug 16, 2025
  If your Furuno Marine Radar shows marks, legends, and noise but no echo, the issue might be with the TX fuse F801 in the transmitter unit. If the fuse is blown, replace it. However, if it blows again, the modulator or associated circuit could be defective. Other potential causes include a faulty magnetron (check magnetron current and replace if necessary), a defective modulator board, or a defective SPU board, which would also need replacement.
N
nancy98Aug 22, 2025
What to do if Furuno Marine Radar picture is not updating?
- J
  Jonathan BaileyAug 22, 2025
  If your Furuno Marine Radar picture is not updating or freezes, check the connection of signal cables to the bearing signal generator board in the antenna unit. If the issue persists, the SPU board might be defective and require replacement. You can also try turning the radar off and on again to resolve a video freeze-up.
J
Joseph WestAug 19, 2025
How to improve poor sensitivity on Furuno Marine Radar?