Furuno SC-50 Operator's Guide

SC-50 THD SATELLITE COMPASS
Operator’s Guide
The purpose of this Operator's Guide is to provide basic operating procedures for this
equipment. For more detailed information, see the Operator's Manual.
MENU
ENT
DISP
DIM
HDG
SETUP
SAT
STATUS
SATELLITE
COMPASS
Omnipad: Selects menu items; shifts cursor.
MENU key: Opens menu.
ENT key: Terminates keyboard input.
DISP key: Selects display; closes menu.
DIM key: Adjusts panel illumination,
display contrast.
HDG SETUP key: Choose heading
source.
SAT STATUS key: Shows satellite tracking
status display.
Turning Power On/Off
Use the power switch on the processor unit
to power the display unit on/off.
Dimmer, Display Contrast
1. Press the DIM key.
DIMMER (1-8)
CONTRAST (0-63)
EXIT: [ENT]
4
45
2. Press [up] or [down] arrow to adjust
dimmer (panel illumination).
3. Press [left] or [right] arrow to adjust
display contrast.
4. Press the ENT key.
Choosing a Display
Use the DISP key to choose desired display,
among heading, steering, compass, ROT
and speed.
Smoothing Position
1. Press the MENU key.
2. Choose GPS SETUP and then press the
ENT key.
GPS SETUP
SMOOTH POS : 0SEC
SMOOTH S/C : 5SEC
LAT OFFSET : 0.000'N
LON OFFSET : 0.000'E
DISABLE SV :
3. Choose SMOOTH POS and press the
ENT key.
4. Use the Omnipad to enter smoothing
value and then press the ENT key.
5. Press the DISP key to finish.

Furuno SC-50 Specifications

General

Brand	Furuno
Model	SC-50
Category	Compass
Language	English