Fusion MS-CD50 User Manual

44
5
DETACHING FRONT PANEL
1. To detach the front panel press the open button
2. Then press the release button on the front underside edge and slide the face toward you.
3. A protective case is supplied to store your removeable front panel in.
REATTACHING FRONT PANEL
1. If the panel bracket is in the open position slide the panel back on into position.
2. If the panel bracket is in the upright position clip one end in firstly and then clip the other end in
and the panel will lock in place.
WIRING CONNECTIONS
REMOVING THE UNIT
1. Press the open button on the face plate
2. Insert the supplied keys into the grooves in the housing until they click (as shown)
3. Pull the levers towards you and slowly remove the unit from the cage.

Fusion MS-CD50 Specifications

General

Brand	Fusion
Model	MS-CD50
Category	Marine Equipment
Language	English