FUXTEC FX-4MS142 User Manual

Original Bedienungsanleitung FX-4MS142_de_en_fr_ita_rev01
50
Spark plug
Check &
adjust
■
Exchange
■
Spark plug
connector
(optional)
Clean up
■
Cooling fins
Exam
■
connecting
elements such
as screws and
nuts
Check
(tighten if
necessary)
Coupling
Exam
■b
Idle speed
Check and
adjust
■b
Valve
clearance
Check and
adjust
■b
combustion
chamber
Clean up
300 h thereafter
Fuel
Check
■
Fuel tank
Check
■
Fuel line
Check
Every x years (replace if necessary)
WARNING
A. Increase maintenance intervals if working in dusty environments.
B. All maintenance work - except for the work listed in the operating instructions -
must be carried out by qualified maintenance personnel
C. For commercial use, maintenance cycles must be adjusted as required.
Oil change
It is also recommended to replace the oil if it runs hot and loses
its lubricating properties.
1 After filling, check that the oil cover is well closed.
2 When changing the oil, unscrew the oil cover and tilt the motor towards the oil filler neck
to collect the oil in a suitable container for used oil.
3 Fill in sufficient new 4 cycle oil.
4 Screw the oil cover back in.
In case of spillage, please wipe off the overflowing oil and do not forget
to wash your hands well with soap.
WARNING
Please contact your local community for the disposal of the used oil. Please do not dispose
of used oil in the sewage system or the open environment.

FUXTEC FX-4MS142 Specifications

General

Brand	FUXTEC
Model	FX-4MS142
Category	Trimmer
Language	English