Original User Manual FUXTEC FX-RM Series_de_en_fr_ita_rev17
49
- Watch out for pits, furrows, or bumps. Tall grass can hide foreign
objects.
- Do not mow at differences in height, ditches, or dams. The user of
the device may lose his footing and balance
- Do not mow on excessively steep slopes.
- Note that the user of the device is responsible for accidents or
injuries to other people or property
- Be alert and switch off the device when children enter the work
area.
- With rotating devices, you should mow horizontally and not
vertically over the slope.
- Never allow children or persons not familiar with the operation of
this lawnmower. Local regulations may limit the age of the user.
- WARNING - Gasoline is extremely flammable.
- Store gasoline in containers designed for this purpose.
- Fill the tank outdoors only. Never smoke while filling the tank.
- Add gasoline before starting the engine. Never remove the filler
cap or fill the tank with gasoline while the engine is running or still
hot.
- Never start the engine if the oil is spilled. Move the device to
another location. Avoid any kind of ignition or sparking until the
petrol fumes are entirely removed.
- Carefully replace all fuel tank and container caps
- Inspect the blades, bolts, and cutters for visible wear and damage
before using the device. Replace worn or damaged blades and bolts
in sets to avoid imbalance.
- Never change the safety devices. Check their proper function
regularly.
- Keep the device free from grass, leaves, and other residues.
Remove any oil or fuel residues. Let the device cool down before
storing it.
- Be incredibly attentive when changing the mowing direction on
slopes.
- Never attempt to adjust the cutting height while the engine is
running.
- The crop catcher and its parts are subject to wear, damage, and
abrasion, which could expose rotating parts. This can lead to
objects being thrown. Check the individual parts regularly and, if
necessary, replace them with original spare parts recommended by
the manufacturer.
- The blades are sharp and cut precisely. Be careful when servicing
the blades. Wrap the blades in a cloth or wear protective gloves.
- Do not change the engine speed controller and do not overload the
motor