13
15
14
16
Control up to 32
different Gaposa
motorized products
from the App from
anywhere you are.
QUICK GUIDE
Technical details
The app will find
your location and
auto fill your details.
Please confirm this
is all correct.
Scan the QR code
or enter the serial
number.
Click Register Now
-The app will ask to
use the camera to
take a picture of the
QR code
Once you have cre-
ated your account,
please sign in using
the credentials you
just created.
The app is now
setup and you can
begin to add rooms
and shades.
Before installing RollApp, read this installation and the safety instruction carefully. The installation and implementation of this product must be carried
out by a motorization and home automation professional, in accordance with the GAPOSA instructions and the regulations applicable in the country of
commissioning.
The installer must inform his customers of the conditions of use and maintenance of the product. Any use outside the scope of application defined by
GAPOSA is prohibited. As with any breach of the instructions in this manual, it would result in the exclusion of liability and warranty claims under GA-
POSA. Before installation, check the compatibility of this product with the associated equipment and accessories. Please read these warnings carefully,
they supplement the product manuals before using RollApp home automation solutions. Please also notify all other RollApp users of the following.
GAPOSA cannot be held responsible for any harmful consequences that could occur if the user has not taken into account the instructions given in the
product manual, in the safety instructions and warnings below. For information, advice and complaints regarding the use of RollApp home automation
solutions, please contact a GAPOSA representative (www.gaposa.com) or refer to the applicable sales literature.
GAPOSA Srl has developed RollApp to control GAPOSA radio products, including motors for shutters and blinds as well as receivers and sensors of the
same brand. The control of garage doors and gates is not recommended and therefore excluded from RollApp.
When configuring or using a home automation system, users must take into account the environment of the home as well as each specific equipment or
any particular situation relative to each of the residents. Users must take additional precautions when remotely configuring connected equipment or when
its operation is likely to affect children, persons with reduced mobility or animals. Users must use the GAPOSA home automation services in their area of
use (see applicable sales documentation) and set up the operating scenarios correctly so that they do not create any risk for the residents of the house.
The functioning of GAPOSA home automation solutions must be tested periodically by the main user. The latter must regularly check the various connec-
tions and operating scenarios. GAPOSA recommends that the connected equipment and its settings be subject to preventive maintenance and regularly
checked by a home automation professional, at the initiative of the Primary User.
Hub Input Voltage 5V
Hub Input Power 0.3 A Max.
Frequency 434.15 MHz
Connection Wi-Fi
Wi-Fi network 2.4 GHz only
Range 30 mt / 98 feet
Protection Rate IP20
Operation Temperature 0°C to 60°C / 32°F to 140°F
IOT Integration works with Amazon Alexa and Google Assistant
en
GAPOSA srl
via Ete, 90 - 63900 Fermo - Italy
T. +39.0734.220701 - F. +39.0734.226389
info@gaposa.com - www.gaposa.com
GAPOSA Inc.
3920 Providence Road
Newtown Square PA 19073
Ph. 610 325 3697
info@gaposa.com
To Next Page
Need help?
General
