123 45
1 2 3
4 5 6
7 8
0
9
GARDENA
Start
ADJ UST THE MOWER TO SUIT THE SIZE OF YOUR LAWN
The mowing results depend on mowing time. Adjust the
mowing time to suit your garden using the
If the mower cuts too often, the lawn will appear trampled
If the mower cuts too seldom, the lawn will not be properly
TEST RUN THE MOWE R THROUGH NARROW PASSAGES
Narrow passages in the garden make it difcult for the
mower to nd the charging station. Use the
function to test that the mower can travel through the
lace the mower in the charging station
Settings - Calibrate Guide
Settings - Calibrate Guide) in the Settings - Calibrate Guide
ower follows the guide wire through the
passage.
f the mower travels through the passage, the test is
f the mower does not travel through the passage:
Check that the guide wire has been laid according to the
instructions in chapter 3.6 in the Operator’s Manual.
Adjust the mower to suit your garden
See chapters 6.3 and 6.5 in the Operator’s Manual
Here you will nd some tips on important settings for your GARDENA R40Li.
All settings for your GARDENA R40Li are made via the menu functions.
You decide what times during the day and days of the week the
mower is to work. The
per hour and day. For example; If your garden consists of
300 m² of grass, the mower should work on average
The right to make changes without prior notice is reserved.
Copyright © 2012 GARDENA Manufacturing GmbH. All rights reserved.
Starting and stopping GARDENA R40Li
See chapters 4.3 and 4.4 in the Operator’s manual.
1. Open the cover by pressing the
et the main switch to position
. When you do this for the
rst time, a start up sequence starts where you select a four
digit PIN code among other things.
GARDENA Robotic lawn mower R40Li