GPSMAP
™
276C
Quick Reference Guide
GPSMAP 276C Keys
IN/OUT—press to zoom in or zoom out on the Map Page.
PAGE—press to cycle through the main pages in sequence and return
the display from a submenu page. Press and hold to switch between
Marine Mode and Automotive Mode.
QUIT—press to cycle through the main pages in reverse sequence,
revert to the previous value in a data entry field, or cancel a
function.
ENTER/MARK—press to select a highlighted option, initiate
entry, and then confirm. Press and hold to mark a waypoint.
MENU—press to view Options Menu for the current page. Press
twice to open the Main Menu.
NAV/MOB—press to open the Navigation Menu window. In
Marine Mode, press and hold to activate the MOB function. In
Automotive Mode, press and hold to open the Next Turn Page and
have the voice prompt announce the next turn.
FIND—press to open the Find Menu.
POWER—press and hold to turn the unit on and off. Press and
release to adjust the backlighting and external speaker volume.
ROCKER—press up, down, left, or right to select menu options,
enter data, or move the pointer on the Map Page.
Finding Items
To find a waypoint or other item from your current location:
1. From any page, press FIND.
2. Highlight a category from the list, and press ENTER.
3. Highlight an item from the results list, and press ENTER.
Find Menu Results List
To find an item from another location using the Find menu:
1. From any page, press FIND.
2. Press MENU. Highlight Near Other, and press ENTER.
3. Select a reference location on the map, and press ENTER. The list
changes to show items nearest to the new map location.
To find an item from another location on the Map Page:
1. From the Map Page, use the ROCKER to pan to the location you
want, and press FIND.
2. Highlight a category from the list, and press ENTER.
3. Highlight an item from the list, and press ENTER.
Going to a Destination
To Go To a highlighted map item:
1. Use the ROCKER to highlight the item you want to navigate to on the
Map Page.
2. Press NAV/MOB, and then press ENTER.
3. Follow the magenta route created on the Map Page. You can also
use the Compass Page to help you navigate to the point.
Navigation shown on the
Map Page (Marine Mode)
Navigate Options with Map
Feature highlighted
To activate a Go To from the Find Menu:
1. Press NAV/MOB.
2. Use the ROCKER to highlight Go To Point, and press ENTER.
3. From the Find menu, highlight Waypoints, and press ENTER.
4. Select a waypoint from the list, and press ENTER to open the
Waypoint Review Page.
5. With the Go To button highlighted, press ENTER to begin navigation.
Backlit keypad for easy
nighttime operation
Antenna
External power
connector under
weather cap
USB connector under
weather cap
Port for optional
data card
Battery pack. Press tab down
to remove battery pack for
replacement, if necessary.
256-Color TFT display
with backlighting
Antenna
collapses for
storage. Be sure
the antenna is
up (as shown
here) to receive
satellite signals.
190-00335-01 Rev. B © Copyright 2004, 2005 Garmin Ltd. or its subsidiaries Printed in Taiwan
To Next Page
Need help?
General
Weight and Dimensions
