PANOPTIX
™
ICE FISHING KIT
INSTALLATION INSTRUCTIONS
Assembling the Portable Mount
You need a Phillips screwdriver to assemble the portable mount.
1 Insert the handle into the two openings on the portable mount base .
2 Secure the handle to the base using the two 42 mm machine screws and two nuts .
3 Slide the included hook and loop straps through the narrow slots beside the battery compartment.
4 If you are installing a Panoptix LiveScope
™
sonar module , using the eight included 21 mm screws , split
washers, and flat washers, attach the two included brackets to the module, and secure the brackets to
the portable mount.
5 Align the chartplotter bail mount over the hole pattern that matches your bail mount, with the openings on
the top of the bail mount facing the back of the base.
GUID-C5E8D7D2-C09F-45FD-82BF-4470A5CE1713 v2March 2021
To Next Page
Need help?
General
