EasyManuals Logo
Home>GE>Microcassette Recorder>3-5385

GE 3-5385 User Manual

GE 3-5385
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
BATTERY
INSTALLATION
1.
Open hinged battery compartment door by pressing down at
arrow, sliding it as indicated and
lifting
it up.
NOTE:
To avoid damage to the battery
door,
do not attempt
to force door beyond its normal stopping
point.
2.
Insert 2 "AA"-size alkaline batteries (not included)
into
bat-
tery compartment.
Be
sure the (-t-) or cap end of
each
battery
is
installed as shown on the battery diagram.
3.
Close the battery
door.
To
save
on batteries, use the optional Rechargeable Battery
Pack,
No. 5-1753. (See page 7.)
NOTE:
If the recording sounds distorted, or if the tape moves
very
slowly or not at all, check the batteries. Try AC
power or a fresh set of batteries before seeking service
(See
Rec/Batt
Light, page 6).
Please
note, if
unit
is in AVR mode for recording pur-
poses,
tape operation will not start
until
a sound ac-
tivates the function.
IMPORTANT: Be sure to remove the batteries when storing the
unit
for more than a few weeks at a time.
Leaky
batteries can
badly damage the recorder. Dispose of "dead" batteries in the
proper manner in accordance
with
state and local regulations.
AC
POWER
CONVERTER
(INCLUDED)
To
save
batteries, you can use the AC Power Converter to
operate your recorder.
The
AC Power Converter cord plugs
into
the 3V
DC
Jack
on the
recorder and the Converter plugs
into
AC household
outlet.
When the AC Converter is
used,
batteries are automatically
disconnected.
TO
INSERT OR REMOVE A
MICROCASSETTE
1.
The
STOP/EJECT
button
is used to stop recorder and to
open
CASSETTE
CARRY
DOOR and
EJECT
cassette.
CASSETTE
INSERTION
1.
FACE
SIDE
TO BE
USED
UPWARD
2.
FACE
EXPOSED
TAPE
OUTWARD
3.
SLIDE
CASSETTE
INTO DOOR
SLIDE
2.
To insert or remove
cassette
when
RECORD
or
PLAY
button
is
depressed, you must first press
STOP/EJECT
button
[to
return buttons to off (up) position], then press
STOP/EJECT
button
again to open
CASSETTE
CARRY
DOOR.
3.
Insert
cassette
into
CASSETTE
CARRY
DOOR
with
side to
be used visible
through
cassette
door window and then close
door.
NOTE:
Rim drive and capstan drive tapes look
alike,
but on-
ly
CAPSTAN
DRIVE
MICROCASSETTE
tapes will
work (fit) in this recorder.
Always
push
STOP/EJECT
button
before storing.
This
will
relieve
pressure on certain parts in the recorder that
might
deform after long periods of time.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE 3-5385 and is the answer not in the manual?

GE 3-5385 Specifications

General IconGeneral
BrandGE
Model3-5385
CategoryMicrocassette Recorder
LanguageEnglish

Related product manuals