49-7812
USING THE AIR CONDITIONER
Using the Air Conditioner
Fan Only Mode
8VHWKH)DQ2QO\0RGHDW/RZ0HGRU+LJKIDQVSHHG
to provide air circulation and filtering without cooling.
Since fan-only settings do not provide cooling, a Set
temperature cannot be entered. The room temperature
will appear in the display.
NOTE: Auto Fan Speed cannot be used when in the
Fan Only Mode.
Auto Fan Mode
Set to Auto fan speed for the fan speed to automatically
set to the speed needed to provide optimum comfort
settings with the set temperature.
If the room needs more cooling, the fan speed
will automatically increase. If the room needs less
cooling, the fan speed will automatically decrease.
NOTE: Auto Fan Speed cannot be used when in the
Fan Only Mode.
Power Outage Recovery Feature
In the case of a power outage or interruption, the unit will
automatically restart in the settings last used after the
SRZHULVUHVWRUHG,IWKH'HOD\±KUIHDWXUHZDVVHWLW
will resume countdown. You may need to set a new time
if desired.
Air Direction
8VHWKHOHYHUWRDGMXVWWKHDLUGLUHFWLRQOHIWDQGULJKW
only.
Control Display On and Off
To reduce brightness during sleeping hours, this air
conditioner control display has an automatic off feature
where the control display will turn off completely
after 2 minute of inactivity. To illuminate the control
interface, press any button on the control display or
remote control. The control display will illuminate all
SUHYLRXVO\LOOXPLQDWHG/('¶V7KHFRQWUROLQWHUIDFHZLOO
now respond to any prescribed button press after it is
illuminated.
To Next Page
Loading...
Need help?
General
