GE AEW10 Series User Manual

About the controlson the air conditioner.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
NOTE:Thedisplayalways Lightindicates the unit
showstheroomtemperature is in the temperatureor
except when setting theSet delaytimeSetmode.
temperatureortheDelaytimer.
0 -Auto
u, High uCool
Med I Energg Saver
LOW _ Fan Ontg
a--@e9G?e3 r-r oa
Lightindicates the
delaytimeris set.
Air Conditioner Controls
Delay1-24hr
Delaytimer @Decrease
Modeselect 0
Fanspeed 0Decrease
Temperature 0
set Increase
andDecrease
Remote Control
Controls
O ower Pad 0
Turnsair conditioner on and off.When turned
on,the display will show the room temperature.
O Display
Showsthe room temperature or time remaining
onthe Delaytimer. Shows the Set temperature
while setting the temperature inCool or Energy
Saver modes.TheSetlight will turn onwhile
setting.
O emp Increase •/Decrease • Pads
Useto set temperature when in Coolor Energy
Saver mode.The Set light will turn onwhile
setting.
O elay Timer Increase • (+)/Decrease • (-)
Pads
Eachtouch of the Increase • / Decrease •
pads on the unit or the Increase + / Decrease
- padson the remote control will setthe delay
time when using the Delay 1-24hr timer. The
Setlight will turn on while setting.
O an Speed Pads
Useto set the fan speed to Low, Mad, High
or Auto on the unit. NOTE:Onthe remote
control, usethe fan speed Increase + /
Decrease - pads to set the fan speeds to Low,
Mad or High. Usethe Auto pad to turn Auto
fan on.
0
Mode Pad
Useto set the air conditioner to Coo/,Energy
Saver or Fan Onlymode.
Delay Pads/Delay 1-24hr Pad
Delay ON--When the air conditioner isoff,itcan
be set to automatically come on in 1to 24 hours
at its previous mode and fan settings.
Delay OFF--When the air conditioner is on,
it can be set to automatically turn offin 1to
24 hours.
How to set:
Pressthe Delay 1-24hr pad on the unit or the
Delay pad on the remote control. Eachtouch
of the Increase • / Decrease• pads on the
unit or the Increase + / Decrease - pads on
the remote control will setthe timer in 1-hour
intervals.The Set light will turn on while setting.
Toreview the remaining time on the Delay
1-24hr timer, pressthe Delay 1-24hr pad on
the unit or the Delay pad on the remote control.
Usethe Increase • / Decrease • padson the
unit or the Increase + / Decrease - pads on the
remote control to set a new time if desired.
Tocancel the timer, pressthe Delay 1-24hr pad
until the light on the Delay 1-24hr pad goes off.
Note: The default temperature reading on the display is degree Fahrenheit (°F). To change the display to
degree Celcius (°C),press the Temp Increase • and Temp Decrease • buttons together and hold for 3
seconds. Repeat the process to change back to degree Fahrenheit (°F)
4

GE AEW10 Series Specifications

General

Brand	GE
Model	AEW10 Series
Category	Air Conditioner
Language	English