GE APCA10 User Manual

12 49-5000635 Rev. 0
Installation Instructions
4. Connect Exhaust Hose to the
Window Panel
Place the Air Conditioner close to the window
ensuring there is at least 20” of clearance from
the wall and any other obstructions. Extend the
KRVHVRWKDWLWUHDFKHVWKH:LQGRZ.LW,QVHUW
the Exhaust Hose Adapter into the opening in the
Window Kit and slide it into the locking position.
Ensure that the hose runs straight to the window
with no excess extension. Use the small screw to
attach the exhaust hose assembly to the window
sealing plate assembly.
Important: The Air Conditioner must be vented to
the outside. Do not use a longer hose or extend the
hose included with the Air Conditioner or the unit
will not cool properly and will overheat.
INSTALLATION INSTRUCTIONS
5. COMPLETE INSTALLATION
1. Plug the power cord into a grounded 3
prong outlet.
2. Press the Reset button on the plug to
ensure the safety plug is providing power to
the Air Conditioner.
3. When removing the Air Conditioner, be sure
to remove the Window Kit.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power
cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or
electrical shock.
RESET
TEST
FP
FP
20”
50cm

GE APCA10 Specifications

General

Brand	GE
Model	APCA10
Category	Air Conditioner
Language	English