Need help?Do you have a question about the GE Carestation 620 and is the answer not in the manual?
General| Brand | GE |
|---|---|
| Model | Carestation 620 |
| Category | Medical Equipment |
| Language | English |
Defines the general purpose and application of the Carestation anesthesia systems.
Specifies patient populations and environments suitable for system operation.
Details potential complications associated with mechanical ventilators.
Identifies conditions or situations where the device should not be used.
Critical safety procedures and precautions for system operation.
Identification of major system components and their functions.
Operation of controls for anesthetic vaporizers.
Overview and interpretation of the main anesthesia system screen.
Navigating through system menus and screens using controls.
Accessing and operating system menus via function keys.
Operation and functions of the ComWheel control for navigation and selection.
Utilizing dedicated keys for rapid access to system functions.
Essential safety guidelines for operating the anesthesia system.
Step-by-step instructions for powering on the anesthesia system.
Procedure for initiating manual breathing support.
Steps to initiate mechanical ventilatory support for patients.
Initiating a patient case with initial system setup.
Beginning a case using pre-configured system settings.
Customizing system settings before initiating a patient case.
Procedure for concluding a patient case and system standby.
Proper procedure for powering down the anesthesia machine.
Configuring ventilation modes and settings.
Steps to switch between different ventilation modes.
Adjusting operational parameters for ventilation.
Setting automatic alarm limits for key parameters.
Configuring automatic adjustment of alarm limits.
Accessing and configuring system-wide settings.
Configuring all system alarm parameters and behavior.
Adjusting the thresholds for various system alarms.
Daily checks to ensure system readiness before patient use.
Routine checks performed before each individual patient case.
Correct procedure for installing anesthetic vaporizers.
Verifying proper installation of anesthetic vaporizers.
Setting up compensation for patient circuit compliance.
Accessing and navigating the system checkout procedures.
Performing a comprehensive system test before operation.
Testing the ventilator and breathing circuit for leaks.
Testing anesthetic vaporizers for gas leaks.
Testing the system's gas control valves and flows.
Testing the breathing circuit for leaks.
Critical safety precautions when using airway modules.
Steps to connect airway modules to the anesthesia system.
Procedure for calibrating airway modules.
General information about system alarms and their behavior.
Understanding alarm prioritization and visual cues.
A table of system alarms, causes, and actions.
Procedures for verifying alarm functionality.
Essential safety precautions for system setup.
Steps to connect the breathing circuit to the system.
Procedures for installing and preparing the CO2 absorber canister.
Installing or replacing the O2 sensor cell.
Connecting the system to electrical power sources.
Connecting gas supply lines to the system.
Connecting medical gas supply lines.
Procedures for installing gas cylinders.
Steps for installing cylinders with pin-indexed yokes.
Steps for installing cylinders with DIN connections.
Conducting a leak test for high-pressure gas systems.
Safety precautions related to system maintenance.
Recommended maintenance tasks and their frequencies.
Procedure for replacing the O2 sensor cell.
Accessing and performing system calibrations.
Calibrating system flow and pressure sensors.
Procedures for O2 cell calibration.
Principles of operation for the ventilator engine.
How the system monitors oxygen concentration.
Overview of available mechanical ventilation modes.
Detailed explanation of the VCV ventilation mode.
Detailed explanation of the PCV ventilation mode.
Detailed explanation of the PCV-VG ventilation mode.
Explanation of the SIMV VCV ventilation mode.
Explanation of the SIMV PCV ventilation mode.
Explanation of the SIMV PCV-VG ventilation mode.
Explanation of the PSVPro ventilation mode with apnea backup.
Explanation of the CPAP + PSV ventilation mode.
Default parameters for various ventilation modes.
Operating ranges and constraints for ventilator settings.
Performance accuracy metrics for ventilator functions.
Introduction to Super User mode and its access.
Setting system-wide default parameters.
Configuring system alarm behavior and defaults.
Setting default configurations for different case types.
Customizing default settings for each case type.
Tables showing factory default settings for case types.
To Next Page