EasyManuals Logo
Home>GE>Washer>GTW485 series

GE GTW485 series User Manual

GE GTW485 series
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
GEAppliances.com
PROPERINSTALLATION
This washer must be properly installed and located in accordance with the Installation Instructions before it is used.
[] Ensurethat the hot water hose is connected to the "H" []
valve and the cold water hose is connected to the "C"
valve.
[]
[]
Installor store where it will not be exposed to
temperatures below freezing or exposedto the weather,
which could cause permanent damage and invalidate the
warranty.
Properlyground washer to conform with all
governing codes and ordinances. Follow details
in Installation Instructions.
)_ Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
DO NOT remove ground prong.
DO NOT use an adapter.
DO NOT use an extension cord.
Failure to follow these instructions can result in death
or electrical shock.
[] Ensurewasher is properly leveled and washer legs are
adjusted such that unit is stable.
Optional drain hose extension recommended for
discharging heights from 60" - 96"
[] This washer does not include water supply hoses.
GEstrongly recommends the use of factory specified
parts.A list of factory hoses available for purchase are
listed.These hosesare manufactured and tested to meet
GEspecifications.
GEstrongly recommends the use of new water supply
hoses.Hosesdegrade over time and need to be replaced
every 5 years to reduce the risk of hosefailures and water
damage.
Parts and Accessories
Order on-line at GEApplianceparts.com today, 2/4hoursa
day or by phone at 800.626.2002during normal business
hours. In Canada, visityour local GEparts distributor or call
800.66!.1616.
Purt Number
PH!4X!O002
Or
PM!4X!O005
WH49X30!
Accessory
4ft rubberwatersupply hoses
4 ft braided water supply hoses
Drain hoseextension
PH7X! Washer FloorTray
4
START-UPSEQUENCE
[] Any time the washer is being started or restarts after the
washer lid has been opened and closed, the washer will
turn on the cold water valve for two short periodsfollowed
by a !0 second pause before continuing.
[] If the lid isopened during this period,the washer will
pause.You will have to push the Start button again to
restart the cycle.
WHEN NOT IN USE
[] Turn off water faucets to minimize leakage if a break or
rupture should occur.Check the condition of the fill hoses;
GErecommends changing the hoses every 5 years.
SAVE THESE INSTRUCTIONS

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE GTW485 series and is the answer not in the manual?

GE GTW485 series Specifications

General IconGeneral
BrandGE
ModelGTW485 series
CategoryWasher
LanguageEnglish

Related product manuals