Cooting by Time
Time Cook I
Time Cook allows you to
microwave for a selected
amount of time.
Power
level
10 (High) is
recommended for most cooking,
but you may change this for more
flexibility. See the Cooking Guide.
To become better acquainted with
time cooking, make a cup of coffee
by following the steps below.
Step 1: Fill a cup
2/3
full of water,
add 1 teaspoon of instant coffee
and stir to dissolve. Use a cup
that has no metal decoration
-
and is microwave-safe (refer to
the Microwaving Tips section).
Place cup in oven and close door.
n
TIME COOK
I
&II
Step 2: Touch TIME COOK I
& 11.
Step
3: Select your time. Touch
1,0
and O pads for one minute.
Because automatic power level 10
is recommended for this cup of
coffee, there is no need to change
the power level. (If power level 10
is not appropriate, see “How to
Change Power Level” above.)
Step
4: Touch START.
Step 5: When time is up, the oven
signals and flashes “End.” Oven,
light and fan shut off.
Step 6: Open the door.
If you interrupt Time Cook to
check the food, simply close the
door and press START to resume
cooking. If there is not time
remaining on the timer you must
reset the timer to resume cooking.
How to Change Power Level
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number
for new power level. Then
touch START.
Using the Time Cook II
Feature
The Time Cook II feature
lets
you
set two time cooking functions
within one program. This is ideal
if you want to change power levels
during your cooking operations.
Here’s how to do it:
Step 1: Place food in oven in
microwave-safe container and
close the door.
m
TIME COOK
I &II
Step 2: Touch TIME COOK
I & II.
Step 3: Select your first cook time.
For-example, touch 2,
1
and 5 for
two minutes and 15 seconds.
Step 4: Touch TIME COOK I & 11.
Step 5: Set your second cook time.
Step 6: Change the power level.
How to Change Power Level
After setting cooking time,
touch POWER LEVEL pad,
then touch desired number for
new power level.
Step 7: Touch START.
Step 8: At the end of “COOK
TIME 1,” the second power
level
is displayed and “COOK TIME
II” is shown counting down.
Step 9: When time is up, the oven
signals and flashes “End.” The
oven,
light
and fan shut off.
Step 10:
Open the door.
If you interrupt Time Cook to
check the food, simply close the
door and press START to resume
cooking. If there is not time
remaining on the timer you must
reset the timer to resume cooking.
The Express Cook Feature
The Express Cook feature is a
short-cut method to set time for
1 to 5 minutes.
To Express Cook your food
or beverage:
Step 1: Touch a number pad (from
1
to 5) that corresponds with the
amount of your desired cooking
time (in minutes). For example,
touch the 2 pad for 2 minutes of
cooking time.
Step
2:
Touch the START pad.
The oven
will
automatically signal,
flash “END” and shut off at the
end of the programmed time.
8
To Next Page
Loading...
Need help?
General
