GE JVM1625 User Manual

30
1 To replace the bulb(s),
first disconnect the
power at the main fuse
or circuit breaker panel
or pull the plug.
2 Remove the screw at the
front of the light cover
and lower the cover.
3 Be sure the bulb(s) to be
replaced are cool before
removing. After breaking
the adhesive seal,
remove the bulb by
gently turning.
4 Replace the screw.
Connect electrical power
to the oven.
Cooktop Lights
1 To replace the oven
light, first disconnect the
power at the main fuse
or circuit breaker panel
or pull the plug.
2 Remove the grille by
taking out the 2 screws
that hold it in place.
3 Next, remove the screw
located above the door
near the center of the
oven that secures the
light housing.
4 Replace the screw.
Connect electrical power
to the oven.
Oven Light
Helpful Information
Light Bulb Replacement
Replace the burned-out
bulb with a 40-watt
incandescent bulb
(WB36X10003), available
from your local parts
store.
Replace the burned-out
bulb with a 40-watt
incandescent bulb
(WB36X10003), available
from your local parts
store.
Remove screw

GE JVM1625 Specifications

General

Brand	GE
Model	JVM1625
Category	Microwave Oven
Language	English