GE Profile PVM9005SJ Dimensions And Installation Information

Listed by
Underwriters
Laboratories
PVM9005SJ
GE Profile
™
Series 2.1 cu. ft. Over-the-Range Sensor Microwave Oven
Specification Revised 1/16
NOTE: Requires 120V grounded outlet. Electrical receptacle
must be located in cabinet above microwave oven. No additional
wiring, venting or cabinet rebuilding necessary in many cases.
Complete detailed, easy-to-follow installation instructions and
convenient full-size templates are packed with the Spacemaker
microwave oven.
IMPORTANT INFORMATION: When installing the microwave
oven over a range, allow minimum of 2" from bottom of microwave
oven to top of range backguard to allow for removal of
light covers.
VENTILATION OPTIONS: The microwave ovens are designed
for adaptation to the following three types of ventilation:
• Outside exhaust (vertical – as shown)
• Outside exhaust (horizontal)
• Recirculating (non-vented ductless – see Filter Kit drawing)
INSTALLATION INFORMATION: This information is
not intended to be used for installing unit described. Before
installing, consult installation instructions packed with product/
kit for current dimensional data.
66" MIN.
Mounting
height
from
oor
30"
MIN.
width
required
Exhaust outlet
connects to
3-1/4" X 10" duct
17-1/8"
(rear)
100°
Door open
(without obstruction)
16-5/32"
30 "
16-1/2"
29 15/16"
Minimum distance from
door hinge side to
adjacent wall should
equal 3/4 inch.
14 5/8"
MAX.
11 1/2"
MIN.*
*Maximum depth
with JX15
Bump Out Kit is 16
".
Bump Out Kit
sold separately.
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.

GE Profile PVM9005SJ Specifications

General

Brand	GE
Model	Profile PVM9005SJ
Category	Microwave Oven
Language	English