Archiving
10-12 Vivid S70 / S60 – User Manual
BC092760-1EN
01
Placing the media in any PC automatically starts-up the DICOM
viewer to allow users to view images and loops contained in the
examinations available on that media. There is no need to
perform any installation on the viewing PC station, as the
DICOM viewer is self-contained on the inserted media.
NOTE: Minimal requirements for the Viewing PC are Windows 2000 or
higher (Windows XP Pro, Windows Vista, or Windows 7 (32 or
64 bit)).
The self-contained DICOM viewer is an off-the-shelf product
named EZ DICOM CD Viewer produced by SST Group Inc.
(see: www.sstgroup-inc.com).
The self-contained DICOM viewer contains a built-in quick help
user manual. Read this manual to learn more about the different
functions of the viewer. Translations of the user manual to
different languages are available to the user.
The User Interface may be set to a different language using a
special Language icon in the EZ DICOM CD Viewer.
Configuring the EZ DICOM CD Viewer
The user can configure the system to enable or disable the
embedding of the DICOM viewer on the media.
1. Make sure the DICOM Viewer option is installed.
2. Press Utility/Config on the Touch panel.
3. Select the Connectivity category and the Dataflow
subgroup.
The Dataflow sheet is displayed.
4. Select a dataflow for a DICOM removable media (i.e DICOM
CD/DVD, DICOM USB Harddisk/Memstick)
To Next Page
Loading...
Need help?
General
