Press the left trackball key to Start / Stop the stored cine sequence.
Move the trackball to display the volumes of the stored sequence one by one.
Alternatively use the [Vol Cine #] control to select the desired volume. The selected Volume
number will be displayed also in the monitor’s status bar area.
Note:
If you want to return to the “3D/4D Mode” menu, press the right trackball key (Volpre
displayed in the status bar on the monitor).
Note
The appearance of the Volume Cine read menu depends on the selected probe, trackball
functionality and the Real Time 4D acquisition mode. Some functions will not be available in
certain modes.
To determine the Trackball functionality
[u ROI]: to change the position and size of the render box
[u Cine]: to change to the volume cine mode
To change the display format
Select the desired display format.
To rotate and shift the reference- and 3D image
Volume Mode
Voluson® S6/S8 Basic User Manual
5433669-100 Revision 4 9-97
To Next Page
Loading...
Need help?
General
